Materials & Supplies

Light- to medium-weight fabrics with no stretch will work exceptionally well. Linen, cotton voile, silk crepe, seersucker, tencel, rayon-pretty much anything with some drape will work for this pattern. Lighter weight fabrics will add more drape, and heavier fabrics will result in a more structured garment.

See Size Guide here

-Fabric of your choice--see fabric requirements here

-2” (5 cm) wide elastic cut to length for your waist

-All purpose polyester thread.

We have some wonderful 100% Hemp in the studio that we have used to make these shorts, that sewed up beautifully. Please stop by and see them.

0.8 m lightweight woven fabric

Approx. 1m of Soft sided elastic for the exposed waist band, comfortable length around waist.

Matching polyester thread.

0.3m of woven fabric for exterior ( medium or heavy weight- wool, wool blends, canvass, waxed canvass)

0.2m woven fabric for lining ( light to medium weight - cotton or cotton blend)

0.5m medium weight fusible interfacing

1 spool of thread to match your exterior fabric for topstitching

Light to medium weight woven fabrics with no stretch. Linen, cotton (lawn, poplin, voile, batiste, seersucker, shirting, chambray, quilting cotton, flannel), wool, hemp, rayon/viscose challis or poplin, and Tencel will work well. Structured fabric will have more dramatic volume and drapier fabrics will have more fluid movement. For beginner sewists, we recommend using lightweight cotton.

Size 115cm/45” 145cm/57”

(short sleeved)

0-6 2.5m/(2.0m) 1.7m/(1.5m)

8-12 2.6m/(2.1m) 1.8m/(1.6m)

14-16 2.5m/(2.3m) 2.7m/(2.2m)

18-24 2.7m/(2.5m) 2.7m/(2.3m)

26 -34 2.7m (3.2m) 3.5m(2.5m)

Notions:

27” x27’ lightweight fusible woven interfacing

10 (8 -short sleeve) 3/8 - 1/2” buttons

Coordinating polyester thread

You'll need to bring to class

-Fabric of your choice

-All purpose polyester thread

Recommended Fabrics: Medium-weight fabrics with no stretch. Linen, cotton, hemp, in plainweaves or canvas will work well. Lighter weight fabrics will add more drape, and heavier fabrics will result in a more structured garment. Ensure that whatever material you choose can hold up in the pocket area.

View fabric requirements here .

View the size guide here.

This pattern is offered in a size range of XXS-4XL and three length options (Short, Regular, and Tall).

Medium-weight fabrics with no stretch. Linen, cotton, hemp, in plain weaves or canvas will work well. Lighter weight fabrics will add more drape, and heavier fabrics will result in a more structured garment. Ensure that whatever material you choose can hold up in the pocket area.

See Size Guide here

-Fabric of your choice--see fabric requirements here

-2” (5 cm) wide elastic cut to length for your waist

-All purpose polyester thread.

Almost any woven/non stretch fabric can be used. A bottom weight such a lightweight canvass or cotton twill for the exterior will give the bag more structure. Heavy weight fabric such as denim or heavy canvass will be trickier to topstitch and sew through all the layers. A light weight woven such as quilting cotton is perfect for the lining.

.5m exterior fabric

.5m lining fabric

15” (38cm) zipper

8”(20cm) interior pocket zipper ( optional)

1.5’” (38mm) tri-glide slide adjuster

1.2 m 1.5” (38mm) webbing for strap

polyester thread

This pattern is drafted for woven non stretch fabrics.

45” fabric 3.0m (size 00 - 10)

3.2m (size 12 - 22)

60” fabric 2.55m (size 00 - 22)

2.75m ( size 12 -22)

For the detailed size chart and fabric requirements please visit the pattern website.

The Donny Shirt is designed for woven fabrics. Any sort of light to medium weight woven is suitable. If you choose a fabric like a mid-weight twill or denim you will get a more structured top. If you choose a drapier fabric like a rayon challis or silk, you will get a blousier top.

For the detailed size chart and fabric requirements please visit the pattern website.

You will need:

• Fabric of your choice

• All purpose polyester thread

Fabric Selection: Light to medium weight fabrics with no stretch will work exceptionally well. Linen, cotton voile, silk crepe, seersucker, Tencel, rayon. Pretty much anything with some drape will work for this pattern. Lighter weight fabrics will add more drape, and heavier fabrics will result in a more structured garment.

This pattern is offered in a size range of OS Minus-OS Plus 3. View size information here.

View the fabric requirements for the Georgia here

View the fabric requirements for the Harper Tunic here

View the fabric requirements for the Linn Tee here.

Feel free to give the studio a call if you need help navigating these documents.

You will need:

Fabric Selection: This pattern works best with light- to medium-weight woven fabrics like cotton poplin, broadcloth, linen, rayon, wool suiting, satin, and crepe.

Notions: Coordinating thread, 12–14" invisible zipper, light- to medium-weight fusible interfacing.

For detailed fabric requirments and sizing info please visit the pattern website here.

Feel free to give the studio a call if you need help navigating these documents.

You will need:

• Fabric of your choice

• All purpose polyester thread

Fabric Selection: Light to medium weight fabrics with no stretch will work exceptionally well. Linen, cotton voile, silk crepe, seersucker, Tencel, rayon. Pretty much anything with some drape will work for this pattern. Lighter weight fabrics will add more drape, and heavier fabrics will result in a more structured garment.

This pattern is offered in our entire size range of OS Minus-OS Plus 3 and three length options/views (Tee, Dress, and Midi).

View the detailed fabric requirements here

View detailed size guide and finished garment measurements for this pattern here.

Feel free to give the studio a call if you need help navigating these two documents.

0.5m Jersey and 0.3m optional ribbing. (Ribbing should be 90cm wide. If not buy 50cm)

We have a selection of beautifully soft cotton/bamboo jersey and matching ribbing in the studio available for purchase.

.9m Woven fabric (see below)

All purpose thread

2.5 Twill tape

1m 1/4” Seam a Seam or equivalent. (we have some in studio for purchase by the meter)

This pattern is designed for fabric a minimum of 54” wide that is equally attractive on both sides. If you are using narrower fabric, you will need to double the length needed.

This top is fairly close fitting so requires a medium weight knit fabric with significant stretch. Sweater knits, rib knits, bamboo knits would all be perfect.

Sleeveless

Fabric Sizes. Sizes width. 0-12. 14-18

115cm 1.2m. 1.9m

150cm. 1.2m 1.2m

Long Sleeves

Fabric Sizes. Sizes width. 0-12. 14-18

115cm 1.9m. 2.3m

150cm. 1.9m 1.9m

matching all purpose polyester thread

Depending on your height between 2.0 - 2.5m woven fabric. (140 cm wide) Mid to heavy weight linen, linen blends, Tencel, medium weight cottons, hemp etc. Avoid stretch fabrics.

38mm wide woven elastic. Non rolling in the individual packages is preferred, but if by the meter you will need 1m or at least your comfortable waist measurement. Use black for darker fabrics, white for lighter.

Matching all purpose polyester thread.

1.5m 3/8" twill tape or cord for drawstring * optional

Please visit the pattern webpage for details on sizing and fabric requirements here.

Woven fabrics such as linen, twill, or denim will work great for this jumpsuit.

For details on pattern sizing and fabric requirements please visit the pattern website here.

This coat can be made in any woven fabric; from a light cotton, rayon or silk right through to a heavy wool. The choice is yours! Not suitable for stretch fabrics. You will need an outer fabric and a lining fabric, some fusible interfacing and all purpose thread.

Sizing & Fabric Requirements Size 6 - 20 here

Sizing and Fabric Requirements for Sizes 16 - 32 here

To make this bag you will need a piece of fabric 27” (69 cm) long and between 52” (132 cm) - 60” (152 cm) wide. Heavier weight fabric such as denim, canvas, and twill are recommended.

Notions: all purpose polyester thread.

Flannel or quilting cotton yardage* see below

1 1/2" (38mm) wide elastic, enough to go around your waist un-stretched.

1.8m 1/2" twill tape *optional drawstring*

thread to match

*Adult - Approx. 2.5 -3.0 meters for 30-34" inseam. It is basically double your leg length from your waist, plus 5 inches (12.5cm) for hems. Mens size large 34 -36 inseam requires 3m, smaller ladies sizes will fit into 2.5m.

Kids - size 3m - 6yrs approx. 1 meter , size 7-8 approx. 1.5m, size 10-14 approx. 2 meters.

*Fabric - Based on 44" wide fabric, and does not account for shrinkage, patterned or directional fabric. Some flannels shrink quite a bit so you may want to purchase an additional 20cm.

This pattern was designed especially for woven, medium to heavy weight fabrics like linen, double gauze, cotton twill or silk noil. It would also make up well in some lighter fabrics that have a draped quality like viscose twill, crepe de chine or silk satin.

115cm wide fabric 1.7m ( size 6- 10) 2.25m ( size 12 - 24). 3.0m ( size 24+)

150cm wide fabric 1.8m (all sizes)

enough 38mm elastic to comfortably circle your waist.

All purpose polyester thread

A stable woven fabric such as quilting cotton will work well for this project.

.70m for the main body of the pillowcase (1.00m if your fabric has a directional print - meaning there is a top/bottom or up/down when you look at it)

.25m for the cuff

.10m for the accent strip.

All purpose polyester thread that matched the main body fabric.

This pattern is designed for lightweight linen, but any lightweight woven will do. If you choose a more rigid fabric such as cotton lawn, the neck may appear smaller and the bottom hem fuller. For short sleeve option choose a fabric with no obvious wrong side.

Size and Yardage Chart

Polyester Thread,

Version #2- 1 button approx. 12-20mm

RECOMMENDED FABRIC

The Saltwater Slip Dress is designed for light to mid-weight woven fabrics. Fabrics with a bit of drape will give you more of the classic slip look. Rayon challis, silk, lawn, voile, lightweight linen are all great fabrics for this garment.

3/8"[9.5mm] Lingerie strap slides and rings set

Matching polyester thread

Long Dress:

114cm wide fabric 137 - 162cm 2.40m (xs-m) 1.70m ( xs-m) 2.75m ( l-xxl) 2.40m ( l-4x) 3.10m (1x- 4x) 2.80m (5x-7x) 3.30m ( 5x-7x)

Short Dress:

114cm wide fabric. 137- 162cm 1 50m (xs- m). .9m (xs-m) 1.60m (l-xxl) 1.5m (l - 4x) 2.30m (1x-7x) 2.0m (5x- 7x)

For the Studio Tunic, we recommend a mid-weight woven fabric. Some wonderful choices are mid-weight linen and chambray, cotton twill, Essex linen or light canvas, in solids or prints.

The drape or hand of the fabric will significantly impact the look and fit of the final garment – softer fabrics like washed linen will fall gently for a relaxed, garden vibe, and more sturdy fabrics like light canvas or twill will enhance the oversized, utility look and the A-line silhouette. (If you choose a heavier weight fabric, you might want to use a lighter fabric for your facings to reduce bulk.) More confident sewists might choose a viscose-linen blend for a really luxurious texture.

Fabric Requirements

Sizes 0-22

45″ (114 cm) wide fabric 2.5m

54″ (137 cm) wide fabric 2.0 m

SIZES 24- 28

45” (114 cm) wide fabric 2.8 m

54″ (137 cm) wide fabric 2.4m

SIZES 30 - 34

45” wide fabric is too narrow

54″ (137 cm) wide fabric (2.4 m)

Other Materials

0.7 m of lightweight fusible interfacing, either woven or non-woven.

Polyester thread

Fabric Requirements: This is just a suggestion and will depend on your size and desired sweatpant length. In general it is your desired waist to leg length plus 10cm for shrinkage.

Size 0-14

- 1.2m fabric (140cm+ wide)-.02m of ribbing for waistband (fabric can be used too)

- 1 meter of 5cm/ 2” wide elastic (buy black if using dark colour fabric and white if using light colour fabric)

- Hem option - CUFF- 0.2 meters of ribbing

- Hem option - ELASTIC - 0.5 meter of 2.5cm / 1” wide elastic

Size 16-32

- 1.8m fabric (140cm+ wide)

-.02m of ribbing for waistband (fabric can be used too)

- 1.5m of 5cm/ 2” wide elastic (buy black if using dark colour fabric and white if using light colour fabric)

- Hem option - CUFF- 0.2 meters of ribbing

- Hem option - ELASTIC - 0.5 meter of 2.5cm / 1” wide elastic

Matching all purpose polyester thread.

Prewash if you can.

We have a selection of beautiful cotton twill terry, matching ribbing and thread in the studio available for purchase. Colours available are heather grey, heather blue, caramel and black.

Fabric Requirements: This is just a suggestion and will depend on your size and desired sweatshirt length. In general it is your desired body length plus sleeve length plus 10cm for shrinkage.

Size 0-14

- 1.3m (140cm+ wide)

- 0.3m ribbing (90cm+ wide)

Size 16-26

- 1.6m fabric (140cm+ wide)

- 0.3m ribbing (90cm+ wide)

Size 28-34

- 1.8m fabric (140cm+ wide)

- 0.3m ribbing (90cm+ wide)

Matching all purpose polyester thread.

Prewash if you can.

We have a selection of beautiful cotton twill terry, matching ribbing and thread in the studio available for purchase. Colours available are heather grey, heather blue, caramel and black.

1.0m Cotton jersey for a short sleeved shirt ( 1.5m for a long sleeve)

.1m Cotton ribbing for neckband

Matching all purpose polyester thread.

We have a selection of beautifully soft cotton/bamboo jersey, matching ribbing and thread in the studio available for purchase.

This shirt is best from a woven fabric( non-stretch), such a linen, cotton, lawn, hemp

Sleeve length Short Long

44” wide fabric. 2.1m 2.75m

58” wide fabric 1.85m 2.3m

0.5m woven interfacing

polyester thread to match

This pant is compatible with medium to heavy weight bottom weight fabrics with no stretch. Consider using : Cotton twill, linen, corduroy or denim.

Waist size. 115cm/45” 150cm/60”

25 - 27 “ 2.4m 2.0m

29 - 31” 2.5m 2.0m

33” 2.6m. 2.0m

35” 2.7m 2.0m

38”- 44” 2.8m 2.4m

47” 2.9m 2.5m

Notions:

1 x 24mm ( 7/8”) Button

18cm ( 7”) Zipper

.5m mid weight iron on woven interfacing

Coordinating polyester thread

Suitable for mid weight fabric with a little structure, such as heavy weight linen, lightweight canvas or denim.

2.0 m for up to size 14 ( Large)

2.5m for up to size 30

.5m fusible woven interfacing

Matching thread

Five 1”-wide buttons

This pattern was designed especially for woven, medium weight fabrics like cotton and linen and would look great in fabric that has a draped quality like crepe, viscose twill or satin. It would also make up well in some heavier fabrics like drill and light weight denim.

Please see size guide and fabric requirements for the jumpsuit here.

Please see size guide and fabric requirements for the dress here.